Contact
Electric Dirt Bike FR08DEB ridden on a forest trail
Youth Electric Dirt Bike · OEM / ODM

Electric Dirt Bike FR08DEB

A mid-to-premium youth electric dirt bike: governed 3-speed key-lock, neodymium magnet motor, quiet and low-maintenance electric drive.

Request FOB Price Chat on WhatsApp
CE UKCA Compliance listed for this model, confirmed per market before ordering.

Motor

800W

Top Speed

≥25km/h

Speeds

3 (key-lock)

Battery

36V9Ah Li-ion

Drive / Brakes

Chain · Disc / Disc

Youth Safety Engineering

Three Governed Speeds, One Key-Lock

Fuel bikes can ask too much of a young beginner: pull-starting, throttle control, noise and routine upkeep. FR08DEB answers with smooth, selectable electric power that grows with the rider.

01 10 km/h
First rides · gentle, smooth power
02 16 km/h
Building skill · growing confidence
03 ≥25 km/h
Full confidence · governed top speed

Key-lock selectable. Parents and dealers set the top speed; the bike stays matched to rider ability.

Sized and Tuned for Young Riders

Lower seat, lighter chassis and a manageable footprint help a beginner reach the ground and control the bike. The electric drive stays quiet around the backyard and drops routine maintenance.

615mm

Seat height

Low, confidence-building reach

28kg

Dry weight

Easy for a young rider to handle

68kg

Max load

Rated for growing youth riders

200mm

Ground clearance

Clears dirt, grass and light trails

Mid-to-premium youth electric products focused on electrical-system quality, smooth power delivery, design, safety and low-maintenance ownership.

Four Ways Dealers Sell This Youth E-Bike

Each use case maps to a challenge buyers raise, how FR08DEB answers it, what your operation gains, and the real hardware behind the claim.

01

Beginner Electric Riding

For: Powersports Dealers / E-Mobility Dealers / Youth Recreation Distributors

The challenge

Fuel-powered bikes may be more complex for young beginners due to starting, maintenance, noise and throttle control.

How FR08DEB answers

Youth electric dirt bikes with power levels, speed settings and controller tuning matched to rider ability.

What you gain

Easier operation, lower maintenance, smoother power delivery and lower noise.

Backed by

3-speed key-lock 10/16/25 km/h Neodymium magnet motor Smooth chain drive
02

Backyard & Private Property Riding

For: Family Recreation Dealers / Powersports Dealers / E-bike Distributors

The challenge

Residential and family environments may be more sensitive to noise from fuel-powered bikes.

How FR08DEB answers

Low-noise electric dirt bikes with configurable speed and power settings.

What you gain

Reduces noise and routine maintenance for family recreational use.

Backed by

Near-silent electric drive Governed ≥25km/h top speed Zero on-site emissions
03

Youth Skill Training

For: Training Operators / Youth Dealers / Powersports Distributors

The challenge

Beginners benefit from smoother and more manageable power delivery.

How FR08DEB answers

Progressive training options using multiple speed settings, power levels and bike sizes.

What you gain

Allows gradual progression in speed and power, extending product usability.

Backed by

Selectable 10 / 16 / 25 km/h modes 615mm seat height 28kg dry weight
04

Family Outdoor Recreation

For: Dealers / Distributors / Outdoor Recreation Retailers

The challenge

Parents seek simpler, quieter and lower-maintenance youth powersports products.

How FR08DEB answers

Youth electric dirt bikes in different sizes and power levels.

What you gain

Improves family acceptance and reduces routine maintenance.

Backed by

68kg max load Low-maintenance chain drive 36V9Ah Li-ion battery

Ask for the FR08DEB spec sheet, speed-governor settings and FOB pricing. Reply within 12 hours, quotation within 24 hours.

Start Your Inquiry WhatsApp Us
Manufacturing Transparency

From Steel Tube to Turn-Key: 13 Stages Every Bike Passes

We build the frame in-house and open the whole line to you. Here is the exact route your FR08DEB travels, from specification sign-off to the final quality gate before packing.

A

Specify & Engineer

Stages 1-2
01

Product Specification & Project Confirmation

Every project begins with product specification and market requirement confirmation. Before production, we confirm key details including vehicle model, motor and battery specification, color, configuration, packaging, labels, certification requirements and target sales channel. We also consider whether the products will be distributed through traditional B2B channels or online retail channels, as different sales models may require different packaging and labeling solutions.

02

Engineering & OEM/ODM Development

Our in-house engineering team supports both standard products and OEM/ODM development. Subject to project volume, MOQ and agreed tooling requirements, customization can include frame structure, colors, graphics, seats, lighting, motor and battery configuration, controller and charging options and other product-specific components. For certain plastic and metal parts, dedicated tooling can also be developed according to project requirements.

B

Fabricate the Frame

Stages 3-7
03

Component Sourcing & Incoming Quality Control

Frame-related steel components are manufactured in-house, while most other vehicle components are sourced or customized from qualified suppliers according to product specifications. Incoming components undergo visual and condition inspections before assembly. Functional performance is further verified during vehicle assembly and vehicle testing. Typical categories include the neodymium magnet motor, controller, 36V9Ah Li-ion battery and charger, suspension components, wheels and tires, brake systems, steering components and fasteners.

04

Frame Fabrication

Dirt bike frame components are processed in-house through multiple fabrication operations. Typical processes include: Tube Cutting ?Tube Bending ?Punching ?Laser Cutting ?Fixture Preparation. Controlling these processes internally helps maintain frame dimensions, mounting positions and production consistency before welding.

05

Frame Welding

Frame welding combines manual welding and robotic welding according to the structural requirements of different components. Dedicated welding jigs are used to position frame components during production and help maintain dimensional consistency. The combination of manual and robotic welding allows different structural areas to use the most appropriate manufacturing process.

06

Frame Inspection

After welding, the frame goes through structural and dimensional inspection before surface finishing. Inspection points include frame dimensions, weld condition, left/right symmetry, mounting positions, installation holes and overall alignment. Dedicated inspection fixtures are used where required to verify critical dimensions and mounting locations.

07

Surface Preparation & Powder Coating

After frame inspection, welded structures undergo surface preparation before powder coating. The process is designed to prepare the metal surface for coating and improve finish consistency. Typical process: Surface Preparation ?Powder Coating ?Curing ?Finish Inspection.

C

Assemble the Bike

Stages 8-10
08

Sub-Assembly

Before final vehicle assembly, major vehicle systems are prepared through dedicated sub-assembly processes. Typical sub-assemblies include the hydraulic front forks, rear swingarm and mono-shock, front and rear disc brakes, and the motor, controller and wiring harness. These modules are then prepared for integration into the main vehicle assembly.

09

Main Vehicle Assembly

The frame, front forks and rear mono-shock, chain drivetrain, disc braking, handlebar and controls, seat, and the motor, battery and electrical systems are integrated during the main assembly stage. Because different dirt bike platforms have different structures and configurations, the exact assembly sequence may vary by model. Assembly operations follow defined production requirements for each vehicle platform.

10

Critical Fastener Torque Control

Critical vehicle fasteners are tightened according to specified torque requirements. Depending on the assembly station and component, operators use torque wrenches and electric torque tools. Typical controlled areas include handlebar and clamp components, suspension mounting points, brake components, wheel fasteners, motor mounting points and rear axle components.

D

Inspect, Test & Release

Stages 11-13
11

Safety & Functional Inspection

After assembly, major safety-related and functional systems are inspected before vehicle testing. Brake inspection covers the front and rear disc brakes, brake travel, braking force and pad condition. Steering and suspension inspection covers handlebar play, front wheel alignment, the hydraulic front forks and rear mono-shock damping, and tire pressure. Motor and drive inspection covers power delivery, throttle response, acceleration, the selectable 10 / 16 / 25 km/h speed modes and abnormal noise. Electrical checks cover the 36V9Ah Li-ion battery, charger and charge port, controller wiring and the power cut-off function.

12

100% Vehicle Running Test

Every completed dirt bike undergoes a vehicle running test before final inspection. The test verifies key operating functions including motor response and acceleration toward the ≥25km/h top speed, braking, steering, the selectable speed modes, abnormal noise and general vehicle operation. Dynamic testing also provides an additional opportunity to verify component performance under actual operating conditions.

13

Final Inspection

After the running test, every vehicle goes through a final inspection before packing. A defined inspection checklist is used to confirm the vehicle condition, electrical safety and key functions before release for shipment. This acts as the final manufacturing quality gate before packaging.

One integrated system. EverJoy Moto coordinates product development, quality control, compliance support, and international sales under one integrated powersports supply system.

Technical Data

Specifications, Grouped by System

FR08DEB is a mid-to-premium electric dirt bike configured with Neodymium Magnet Motor, 800W, ≥25km/h. Its chassis, braking, suspension, and market-specific configuration options support dealer, distributor, and OEM/ODM programs.

01 Powertrain & Battery

Motor TypeNeodymium Magnet Motor
Power / Torque800W
Top Speed≥25km/h
Battery36V9Ah Li-ion
ChargerAC100~240V, DC42V1.5A, ETL/UL
Transmission10, 16, 25KPH (3 speeds, selectable with key lock)
Drive TrainChain drive
Gear Ratio80/11

02 Chassis, Suspension & Brakes

Suspension / FrontHydraulic, Conventional
Suspension / RearMono Shock
Brakes / FrontDisc Brake
Brakes / RearDisc Brake
Tires / Front2.5-10 Knobby Pneumatic
Tires / Rear2.5-10 Knobby Pneumatic
RimsAL
Ground Clearance200mm
Wheelbase855mm

03 Dimensions & Weight

Overall Size (L×W×H)1250×570×800
Seat Height615mm
Max Load68kg
Dry Weight28kg
Gross Weight30kg

04 Packaging & Loading

Package Size1030×330×565mm
Loading Quantity336pcs/40’HQ

High-density loading keeps per-unit freight low for distributor and dealer container orders.

Every Angle of the FR08DEB

Factory photos of the FR08DEB as it ships, from front suspension and disc brakes to the motor, chain drive and cockpit.

Electric Dirt Bike FR08DEB studio product shot, red colorway
Electric Dirt Bike FR08DEB side profile and chassis
Electric Dirt Bike FR08DEB front suspension and disc brake detail
Electric Dirt Bike FR08DEB motor, chain drive and rear swingarm
Electric Dirt Bike FR08DEB handlebar, controls and seat

A Powersports Supplier Dealers Keep Reordering From

Nearly 20 years of powersports experience, an in-house frame line, and a 100% running test on every bike before it ships.

17,000m²

Factory area

DongXi Industry Area, Jinhua, Zhejiang

50,000

Units annual production capacity

Steady supply for seasonal demand

90%

Export ratio

North America, Europe, South America, Australia

100+

Clients served

Founded 2015 · 100-person team

Quality Control Across the Line

EverJoy Moto coordinates product development, quality control, compliance support, and international sales under one integrated powersports supply system.

In-house frame fabrication & robotic welding 100% vehicle running test on every bike Final inspection quality gate before packing

Certifications & Response

CE UKCA

Listed for this model; final market and model compliance confirmed before ordering.

Inquiries are replied within 12 hours, quotations provided within 24 hours.

USD 15M annual revenue 10-person R&D team, 50+ patents

Buying Terms, Stated Clearly

MOQ, lead time, incoterms and shipping are laid out here so your team can plan the order without a round of emails.

MOQ

MOQ varies by product and customization level. We support sample orders, trial orders, and selected small-volume or mixed-container projects.

Lead Time

Standard samples are usually available within approximately 7?0 days, while regular production orders generally take around 30?0 days depending on the project.

Incoterms

EXW · FOB · CIF · DDP

Logistics Partners

UPS · FedEx · Full-container ocean freight · China-Europe Railway

Shipping Support

We support ocean freight, air freight, railway transportation, express delivery, LCL, and FCL shipments, together with loading and shipping documentation support.

Packaging

Packaging can be adapted for branding, graphics, specifications, and market-specific OEM/ODM requirements.

Build It Around Your Brand & Market

Eleven customization dimensions and an optional companion battery let you tailor every unit to your market, fleet and brand.

OEM / ODM Customization Dimensions 11 options

  • Colors
  • Graphics
  • Branding
  • Packaging
  • Specifications
  • Motor
  • Electrical systems
  • Wheels
  • Suspension
  • Accessories
  • Market-specific configurations

Subject to project volume, MOQ and agreed tooling, our in-house engineering team supports both standard products and full OEM / ODM development.

Optional Companion

36V-12AH Lead-acid Battery Optional

Supplied as an optional companion part alongside the standard Li-ion pack. Confirm availability, configuration and pricing with your quotation.

We support tailored PowerSports solutions. Sample terms are confirmed per project complexity, so you can validate a configuration before committing to volume.

What Dealers Ask Before Ordering

The questions purchasing teams ask most about this youth electric dirt bike, answered straight.

Do you provide OEM and ODM services?

Yes. Customization can include colors, graphics, branding, packaging, specifications, motors, electrical systems, wheels, suspension, accessories, and market-specific configurations.

What certifications and compliance support can you provide?

Requirements vary by product and market. Depending on the model, relevant standards may include CE, EPA, CARB, CPSC, ASTM, UL-related requirements, and other applicable regulations.

Can I order a sample before bulk production?

Yes. We support standard, customized, and pre-production samples. Sample evaluation is recommended before starting a new product or market project.

What is your MOQ?

MOQ varies by product and customization level. We support sample orders, trial orders, and selected small-volume or mixed-container projects.

What is the typical lead time?

Standard samples are usually available within approximately 7?0 days, while regular production orders generally take around 30?0 days depending on the project.

What after-sales support do you provide?

We provide technical troubleshooting, spare parts support, repair guidance, technical documentation, and online assistance for dealers, distributors, and importers.

Explore the Full PowerSports Range

This model sits in our Electric Dirt Bikes line. Browse the full catalog to compare electric and gasoline ATVs, go karts, dirt bikes and mini bikes, all under one OEM / ODM supply system.

Browse All Products

Our product lines

Gasoline ATVS Electric ATVS Gasoline Go Kart Electric Go Karts Electric Dirt Bikes Gasoline Mini Bike Electric Mini Bike

Model-level comparison pages for this line are being published; the catalog link above lists every available product.

Next Step

Inquire about Electric Dirt Bike FR08DEB

Tell us your market, target quantity and configuration needs. Our team replies within 12 hours with pricing, battery and speed-setting options, sample plans and OEM / ODM options for FR08DEB.

I agree my contact info will be used to reply this inquiry.